1000Wh Storage power station

Specification: NameaaKAYO-1kWh home power station Weightaa26KG Outputaa1.52 kWh Li-polymer battery capacityaa22.2V/66.4Ah

Specification:

Name:KAYO-1kWh home power station

Weight:26KG

Output:1.52 kWh

Li-polymer battery capacity:22.2V/66.4Ah

Charge voltage:AC90~120V

Output voltage:Pure sine wave AC100V

Output frequency:50/60HZ

Rated power output:500W

 

Application scope:

Office equipment: PC, telephone, printer, display device, copying machine, fax machine, paper shredder, projector, etc.

Home device: TV, video recorder, sounding device, DVD display device, VCD display device, fan, lighting, and refrigerator

Travel use: outdoor lighting, microwave oven, cooking etc.

Outdoor use: power tool, vehicle recovery, rescue and relief work, commercial promotion use, etc.

Entertainment use: mobile phone, PDA, digital video recorder, digital camera, battery charge, GPS satellite navigation etc.

Product parts:

Li-polymer battery pack:22.2V/66.4Ah(1.74KWh)

Charger: AC90~120V 50/60Hz Input, constant current and constant voltage, at 9A charge current.

Inverter: Rated output: 500W (pure resistive load. Need reduce output if reductive load.)        Output voltage: pure sine wave AC100V/AC220V (customer can appoint the voltage)

Output frequency: 50/60HZ (customer can appoint the frequency)

        Protection: overload protection, over-temperature protection, short-circuit protection.

        Transfer efficiency: more than 85% transfer efficiency from DC to AC.

PCB board: equalizing charge, short circuit protection, over-charge and over-discharge protection, over-current protection. The highest discharge current is 50A.

Display screen: shows battery voltage and working status.

Electric leakage protection device: Avoid any electric leakage danger.

Working theory:

From DC to AC; DC transfers to daily electricity through inverter by use of high capacity and high discharge current lithium polymer batteries. AC voltage and frequency can be setted according to customer’s request; If use high power devices like air conditioner or refrigerator, the inverter’s power should be setted by electric equipment accordingly.

Operation notice:

Product appearance as 

Product dimension:L480×W160×T350mm

AC output: 2pcs of standard Japanese 3-pin plugs.

Charge solution: AC charge

Solar panel charge solution: connect the side 2-pin plugs to solar panel to charge battery. The 2-pin plugs 1# was connected the solar panel positive, 2# connected the negative.

Charge guidance (use the black switch): Turn on the leakage circuit breaker, turn on the three-position switch to charge the battery. The fan will work automatically if any over temperature during battery charging. Watch the display screen; please turn off the leakage circuit breaker and three-position switch after charge.

Discharge guidance (use the black switch): Turn on the leakage circuit breaker, turn the three-position switch to discharge status. Product will turn off automatically should any short circuit, overload or over temperature happens during discharge. Please reduce the use of electrical equipment.

Emergency stop switch (use the black switch): Emergency stop protection during charge and discharge period.

1000Wh Storage power station